PH Interface for measuring and checking the pH, by simply connecting a pH electrode.
The moment the interface is connected, it will automatically be identified by the system “Plug & Play” as well as enable the relevant configuration menu.
| Technical specifications | |
| MEASURING RANGE | from 0 to 14 pH |
| MEASURING RESOLUTION | 0,01 pH |
| HYSTERESIS | Set by user |
| ALARMS | Audio and visual with thresholds set by user |
| CALIBRATION | 2-point semi-automatic |
Redox Interface for measuring and checking the ORP value (Oxide-Reduction Potential) in by connecting a ORP electrode.
The moment the interface is connected, it will automatically be identified by the system “Plug & Play” as well as enable the relevant configuration menu.
| Technical specifications | |
| MEASURING RANGE | from – 0mV to 1400mV |
| MEASURING RESOLUTION | 1 mV |
| HYSTERESIS | Set by user |
| ALARMS | Audio and visual with thresholds set by user |
| CALIBRATION | 2-point semi-automatic |
The conductivity interface is used to measure and control the conductivity value in water through the connection of the EC NITZAN electrode.
The moment the interface is connected, it will automatically be identified by the system “Plug & Play” as well as enable the relevant configuration menu.
| Technical specifications | |
| MEASURING RANGE | from 0 mS to 15 mS |
| MEASURING RESOLUTION | 0,1mS |
| HYSTERESIS | Set by user |
| ALARMS | Audio and visual with thresholds set by user |
| CALIBRATION | 1-point semi-automatic |
| COMPENSATION TEMPERATURE | from 5° to 35°C |
Dissolved Oxygen Interface is used to measure and control the value of dissolved oxygen in water (O2), through the connection of the O2 NITZAN Electrode. The moment the interface is connected, it will automatically be identified by the system “Plug & Play” as well as enable the relevant configuration menu.
| Technical specifications | |
| MEASURING RANGE | 0-15 ppm / 0-120% |
| MEASURING RESOLUTION | 1 % or 0.1 ppm |
| TEMPERATURE COMPENSATION | With PT100 |
| ALARMS | Audio and visual with thresholds set by user |
| CALIBRATION | 2 points |
Flow meter module is used to measure and control the water flow in pipes of different diameter through the connection with NITZAN flow sensor
With the same sensor, it is possible to have the flow and the liter counter measurement .
The moment the interface is connected, it will automatically be identified by the system “Plug & Play” as well as enable the relevant configuration menu.
| Technical specifications | |
| MEASURING RESOLUTION | 0,1 lt/hr |
| ALARMS | Audio and visual with thresholds set by use |
| CALIBRATION | 1 point |
| KIND OF SENSOR | With square wave or free contact |